Home In depthApp for drones DJI Fly 1.0.8 for Mavic Mini – Attention to the settings

DJI Fly 1.0.8 for Mavic Mini – Attention to the settings

by Fabio Affortunato
DJI Fly 1.0.8 Attention To Settings
Reading time / Tempo lettura : 4 minutes / minuti

DJI Fly – App for the Mavic Mini

As you know, DJI has created a specific App for piloting its small 249 gram drone, the DJI Mavic Mini. The App, called DJI Fly, is available in the Google Play and Apple Store online stores. The functionality of the App, for the two versions of the S.O. they are described in the relevant DJ Fly iOS and DJI Fly Android App details.

The new version, released on March 27th, at least for the iOS system, in addition to introducing greater stability, a solution to small bugs, has introduced a new option, potentially very dangerous, as far as RTH or Return To Home is concerned.

Purpose of the RTH function

The RTH functionReturn To Home – is an option that allows you to recall the drone. In this case the DJI Mavic Mini, to the take-off position by pressing the physical button on the remote control, or by selecting the same button on the smartphone screen. The drone will then return to home (i.e. at the home point).

RTH activation – DJI Fly

The RTH function, therefore as an automatic procedure, can be activated in relation to these three cases:

  • when the need arises to return the drone to the starting position by choice of the pilot. Remember that during this phase the DJI Mavic Mini can be maneuvered by the pilot. Furthermore, the return procedure can be interrupted at any time;
  • when the drone battery reaches a low level and the situation is notified of the pilot by the drone. It is therefore advisable to re-enter the drone otherwise this could land in an area distant from your position and potentially dangerous;
  • when the signal between the DJI Mavic Mini and the remote control is lost for at least 11 seconds. In this case the procedure (failsafe) is automatically activated. However, the procedure can be canceled by the pilot if the connection between the remote control and the drone is re-established.

RTH settings in the previous version of DJI Fly (1.0.6)

The previous version of the DJI Fly App, 1.0.6, in the settings under “Security“> “Advanced security“, there was the possibility of stopping the engines of the DJI Mavic Mini in two cases: “Emergency only” or “Always“.

Advanced Setting DJI Fly 1.0.6

Advanced settings App DJI Fly 1.0.6 – Screenshoot App

The setting therefore clearly defined the two possible scenarios without ambiguity and without the drone could escape from the pilot’s control.

DJI Fly – Changes of version 2.0.8

With reference therefore to the failsafe situation, described above, when the signal between the DJI Mavic Mini and radio control is lost for at least 11 seconds, the new version of the DJI Fly App introduces three possible actions that the drone can perform when it is encountered the loss of signal between the drone and the remote control:

  • Automatic return: activates automatic return (classic RTH),
  • Land: that force to land the drone directly where it is,
  • Station: make it stay in hovering stationary flight (until the signal returns).
Advanced Setting DJI Fly 1.0.8

Advanced Setting DJI Fly 1.0.8 – Three options for RTH – Screenshoot App

With reference to the “Land” option, this is potentially very dangerous because, if active, it will land the drone wherever it is, with the real possibility of both creating problems and losing the drone.

This option therefore is undoubtedly not to be selected in the advanced security options, in fact make sure before flying that you have selected the first option “Automatic return“, if you do not want to run the risk of losing the drone or creating pointers.

Settings for correct RTH

In order to ensure the return of your DJI Mavic Mimi to the take-off position, once the drone is turned on, it must acquire the home point. This activity, when completed, is clearly indicated by the flashing of the green light on the drone.

It is good also to remember that the home point can be “updated” if you move and want the drone to take this into account to return to you in case of need.

Furthermore, an important note is to set an increasingly higher RTH height than the altitude where we are because the DJI Mavic Mini has no sensors. In this way, with a higher RTH – even 40 meters -, you will avoid the impact with obstacles such as pylons, trees, tension lines, etc.

RTH Setting DJI Fly

RTH altitude setting – Screenshoot App

Final note

In the unfortunate event that you have not changed the setting and the drone lands where it is, I remind you that through the App in the “Security“> “Find my drone” tab you can locate the last position of the Mavic Mini, and through the coordinates GPS and with find my drone it is possible to track drones, taking also advantage of the acoustic signal emitted by the drone if it is still on.

Credits about the images: The images showed in the article are screenshots taken from the DJI Fly App (versions 1.06 and 1.08). The App developer is the legitimate owner. The use of the images is exclusively for the purpose of a better understanding of the contents of the article. The highlighted image is made by 4mydrone.

Go Up

Last Updated on/Ultimo aggiornamento – 28/04/2021

Related Posts

Leave a Comment

On this website we use first or third-party tools that store small files (cookie) on your device. Cookies are normally used to allow the site to run properly (technical cookies), to generate navigation usage reports (statistics cookies) and to suitable advertise our services/products (profiling cookies). We can directly use technical cookies, but you have the right to choose whether or not to enable statistical and profiling cookiesEnabling these cookies, you help us to offer you a better experience.